E500 Portable Tilt-featured RTK Receiver

Labrosse Consulting
$10,967.00
Quantity: 01 + -

E500 is a lightweight tilt-featured product by eSurvey GNSS. The durable IP67 design makes it possible to work in various of environments. Multi constellation and frequency tracking always give a Fixed solution for your job. Thanks to the small-size design, E500 is suitable for different applications such as car and machine control.

MULTI-CONSTELLATION AND MULTI-FREQUENCY

With 800 channels of GNSS tracking, E500 provides stable and reliable accuracy. All GNSS signals are coming with standards including GPS, BDS, GLONASS, GALILEO, QZSS, IRNSS and SBAS.

INTELLIGENT BATTERY LED INDICATORS

Without powering on the device, it is able to check the battery level on the battery LED indicators by simply clicking the power button.

MEMS DYNAMIC TILT SURVEY

eSurvey’ s innovation tilt survey solution provides a surprising experience. The sensor is adapted to various of working environments
and can be ready within 10 sec. A maximum 60 ° incline angle ensures a tilt-to-go survey without stopping your work.

L-BAND ATLAS

Atlas is a service to provide global precision correction service over L-band satellites. With ATLAS subscription, E500 is able to achieve centimeter accuracy without any base station.

ARTK

Powered by Atlas, the innovative aRTK technology operates on any Atlas-capable device by enabling it to maintain RTK-level accuracy, availability, and reliability when RTK corrections fail without additional cost. It is able to view position status, set up working mode, download data and update firmware from the Web user interface with any phone, tablet or PC Intelligent Voice

WEB UI

E500 will broadcast voice automatically to remind the user the solution status is changed. It is also able to manually broadcast current working mode and solution status by short pressing power button.

RUGGED DESIGN 

E500 main body is using magnesium materials to provide strong shock and vibration-resistant characteristics. IP67 certification ensures operation in various of tough environments.

PRODUCT SPECIFICATION

Satellites Tracking
GPS: L1CA/L1P/L1C/L2P/L2C/L5
BDS: B1I/B2I/B3I/B1C/B2a/B2b/
ACEBOC
GLONASS: G1/G2/G3, P1/P2
GALILEO: E1/E5a/E5b/E6/ALTBOC
QZSS: L1CA/L1C/L2C/L5/LEX
IRNSS: L5
SBAS1: L1, L5
L-Band: Atlas H10/H30/Basic

Channels 800
Signal Reacquisition < 1 sec
Cold Start < 60 sec
Warm Start < 30 sec
Hot Start < 10 sec
RTK Signal Initialization < 8 sec
Initialization Reliability > 99.9%
Update Rate 10 Hz standard, up to 50 Hz
Operation System Linux
Internal Memory 8 GB

Performance
High Precision Static H: 2 mm + 0.1 ppm
V: 3 mm + 0.4 ppm
Static/Fast Static H: 2.5 mm + 0.1 ppm
V: 3.5 mm + 0.4 ppm
RTK H: 8 mm + 1 ppm
V: 15 mm + 1 ppm
Code Differential H: 0.25 m
V: 0.45 m
SBAS H: 0.3 m
V: 0.6 m
L-Band
Atlas H10: 4 cm RMS
Atlas H30: 15 cm RMS
Atlas Basic: 30 cm RMS

Power Supply
Battery Rechargeable and built-in Lithium-ion
battery, 7.2 V ~ 6800 mAh
Voltage 9~28 VDC
with over-voltage protection
Working Time Up to 12 hours
Charging Time Typically 4 hours

Internal Radio
Type TX and RX
Frequency Range 410 ~ 470 MHz, 902.4 ~ 928 MHz
Channel Spacing 12.5 KHz / 25 KHz
Emiting Power 1 W
Operation Range 3 ~ 5 Km typically
10 Km with optimal conditions
Protocol Satel, PCC, TrimTalk, TrimMark III,
South, HiTarget

Internet Modem
Support Band Global GSM /WCDMA/LTE

Communication
Bluetooth BT 5.0 + EDR, BLE
WIFI 802.11 b/g/n
SIM Card SIM card
5-pin Port Connect to external radio and power,
NMEA output
Type-C Port Charge and internal storage access
TNC Port Connect to internal radio antenna
Web UI View status, update firmware, set up
working mode, download data
Intelligent Voice Broadcast working status
NMEA Output GGA, ZDA, GSA, GSV, GST, VTG, RMC,
GLL, Binary
Correction Data CMR, CMR+, RTCM2, RTCM3, RTCM32
MEMS
Fast initialization, dynamic tilt survey
up to 60°

Physical
Dimension Φ148 mm x H74.5 mm
Weight 1.06 kg

Operating Temperature -40℃ ~ +65℃
Storage Temperature -45℃ ~ +80℃
Water/Dust Proof IP67
Shock Survive a 2 m drop on concrete floor
Vibration Vibration resistant
Humidity Up to 100%
Indicators Battery
Button Power button
Certificate CE, FCC, NGS Calibration

  1. SBAS supports WAAS, EGNOS, GAGAN, SDCM, MSAS.
  2. Depend on the environment and electromagnetic interference.